E+H Liquiphant FTL81 Level Switch
For liquids for FailSafe overfill prevention.
- For liquids up to SIL3
- Thread and flange process connection
- -76 to 540°F (-60 to 280°C) temperature
E+H Liquiphant FTL85 Level Switch
For use in hazardous areas with all international certificates.
- For liquids up to SIL3
- Thread and flange process connection
- -76 to 300°F (-50 to 150°C) temperature
E+H Liquipoint FTW23 Level Switch
Developed and built for the food industry and meets all international hygiene requirements.
- CIP and SIP cleanability ensured
- LED display
E+H Liquipoint T FTW31 Level Switch
Rod probe for multipoint detection for up to 5 switch points.
- Detection of up to five point levels
- No calibration required
E+H Liquipoint T FTW32 Level Switch
Rope probe designed for multipoint detection for up to 5 switch points.
- Up to 5 rods or ropes
- Threaded process connection
- 0.25 to 15m (10 to 590″) sensor length
E+H Liquiport CSP44 Water Sampler
Portable, fully automatic sampling in water, wastewater and industrial applications.
- -20 to 160°F (-30 to 70°C) measuring range
- ±0.5K accuracy
E+H Liquisys CLM223 Conductivity Transmitter
A standard compact panel device for all analog conductivity sensors.
- 1-channel transmitter input
- 4-wire transmitter with a two-line display
E+H Memograph M RSG45 Advanced Data Manager
Saves, visualizes, analyzes and communicates, multichannel data recording system.
- High degree of data security
- HART input card
E+H Memosens CCS120D Chlorine Sensor
Memosens disinfection sensor for wastewater and process water.
- 0.1 to 10 mg/l total chlorine measuring range
- Amperometric measurement of total chlorine
E+H Memosens CCS50D Chlorine Dioxide Sensor
Memosens sensor for water, process water and utilities in all industries.
- Measuring range:
- Trace: 0 to 5 mg/l ClO2
- Standard: 0 to 20 mg/l ClO2
- High: 0 to 200 mg/l ClO2
E+H Memosens CCS51D Chlorine Sensor
Memosens sensor for drinking water, pool and process water as well as utilities in all industries.
- Amperometric measurement of dissolved free chlorine
- Closed amperometric 2-electrode measuring cell
E+H Memosens CLS15E Conductivity Sensor
Digital 2-electrode conductivity sensor with Memosens 2.0 technology, for low conductivity measurements in pure and ultrapure water.
- Measurement range:
- k=0.01: 0.04 to 20µS/cm
- k=0.1: 0.10 to 200µS/cm
E+H Memosens CLS82D Conductivity Sensor
4 electrode conductive conductivity sensor, 1µS/cm to 500 000 µS/cm range, hygienic design.
- Hygienic design certified by EHEDG and 3-A
- Sterilizable and autoclavable
E+H Memosens CLS82E Conductivity Sensor
For hygienic applications in life sciences, food and beverage.
- Process pressure
- 17bar abs at 20°C (247psi at 68°F)
- 9bar abs at 120°C (131psi at 248°F)
E+H Memosens COS22E Digital Oxygen Sensor
Hygienic, amperometric oxygen measurement for food and life sciences applications.
- Measurement range
- Standard sensor: 0 to 60mg/l, 0 to 600%SAT, 0 to 1200hPa, 0 to 100Vol%
- Trace sensor: 0 to 10mg/l, 0 to 120%SAT, 0 to 250hPa, 0 to 25Vol%
E+H Memosens COS81D Oxygen Sensor
Memosens optical oxygen sensor for hygienic applications in life sciences, pharma and food.
- Memosens optical oxygen sensor
- Hygienic design according to EHEDG and ASME BPE
E+H Memosens COS81E Digital Optical Oxygen Sensor
Hygienic sensor for oxygen measurement over multiple sterilization cycles.
- Measurement range
- 0.004 to 30mg/l
- 0.05 to 330%SAT
- 0.1 to 700hPa
E+H Memosens CPL51E Digital pH Sensor
Laboratory sensor for use in drinking water, wastewater, and process water applications.
- pH 0 to 14 measurement range
- -5° to 80°C (23° to 176°F) process temperature
E+H Memosens CPS11D Orbisint pH Sensor
Memosens digital technology, suitable for harsh applications, up to 232 psi (16 bar).
- 0 to 14 pH measuring range
- Pressure-stable up to 232 psi (16 bar)
E+H Memosens CPS11E Orbisint pH Sensor
Digital Memosens 2.0 electrode for use in process, water, and wastewater industries.
- Sterilizable
- IP68 protection
- ATEX, IECEx, and CSA C/US approvals