E+H Micropilot FMR56 Radar Level Transmitter
Designed for light-duty process conditions as they occur in silos or bins for solids.
- Mounting bracket or slip-on flange process connections
- -40 to 176°F (-40 to 80°C) temperature
E+H Micropilot FMR57 Radar Level Transmitter
Designed for highest demands in bulk solids and best suited for measurements in high silos, bunkers or stockpiles.
- Thread or flange process connections
- –40 to 752°F (-40 to 400°C) temperature
E+H Micropilot FMR60 Radar Level Transmitter
Highest demands in liquid level measurement with 80GHz technology, drip-off antenna, improved algorithms and small beam angle.
- 80GHz technology
- HistoROM data management
E+H Micropilot FMR60B Radar Level Transmitter
For simple continuous non-contact level measurements in liquids, pastes, and slurries.
- +/-1mm (0.04in) accuracy
- -40 to 200°C (-40 to 392°F) process temperature
E+H Micropilot FMR62 Radar Level Transmitter
80GHz level measurement in aggressive liquids or applications with hygiene requirements.
- 80GHz level measurement
- Applications with hygiene requirements
E+H Micropilot FMR62B Radar Sensor
Designed for continuous, non-contact level measurement of liquids, pastes and sludges.
- PTFE antenna or ceramic sealed high-temperature antenna
- Flange process connections
E+H Micropilot FMR63B Radar Sensor
80GHz radar sensor designed for continuous non-contact level measurement of liquids in applications with hygienic requirements.
- ±1mm (0.04in) accuracy
- -40 to 392 °F (-40 to 200 °C) process temperature
E+H Micropilot FMR66B Radar Sensor
80GHz radar sensor designed for reliable, non-contact level measurement of bulk solids in silos or storage tanks.
- ±3mm (0.12in) accuracy
- -4 to 392 °F (-20 to 200 °C) process temperature
E+H Micropilot FMR67B Radar Sensor
80GHz radar sensor designed for continuous non-contact level measurement in demanding solid applications, even with extreme process temperatures.
- ±3mm (0.12in) accuracy
- –40 to 842°F (–40 to 450°C) process temperature
E+H Micropilot NMR84 Radar Transmitter
High accurate non-contact level measurement in stilling well applications in custody transfer.
- Hardware and software developed according to IEC 61508 up to SIL3
- Drip-off antenna design
E+H Minicap FTC260 Point Level Sensor
Rod probe for bulk solids and liquids.
- Capacitance point level detection
- Rod probe for bulk solids and liquids
E+H Minicap FTC262 Point Level Sensor
Rope probe up to 6m (20ft) designed for bulk solids.
- Point level detection
- -40 to 176°F (-40 to 80°C) process temperature
- -14.5 to 90 psi (-1 to 6 bar) pressure limit
E+H Modular TH13 RTD Thermometer in Threaded Thermowell
Barstock thermowell for use with various housing transmitter heads to meet the application and space requirement needs.
- Improved galvanic isolation on most devices (2 kV)
- Bar stock Thermowell
E+H Modular TH14 RTD Thermometer in Flanged Thermowell
Designed for harsh environments, barstock thermowell and flange connection.
- Barstock thermowell
- 2 to 22 icn immersion length
E+H Nivector FTI26 Point Level Switch
Cost-Effective Level Switch for Solids in the Food Industry and Powder Applications.
- -20° to 80°C (-4° to 176°F) process temperature
- -1 to 6bar (-14.5 to 86psi) pressure range
E+H Nivotester FTL325N Level Switch
Switching unit for point level detection in liquid tanks with NAMUR input for rail mounting or single installation.
- Ambient temperature:
- Single installation: -20 to 60°C (-4 to 140°F)
- Rail mounting: -20 to 50°C (-4 to 122°F)
E+H Nivotester FTW325 Level Switch
Point level switch with intrinsically safe signal circuit for connecting to conductive sensors.
- Measuring range up to 200 kΩ
- 10 uS minimum density of medium
- Cable monitoring up to sensor
E+H NRF81 Monitor NRF81 Tank Gauge
Field gateway for tank sensor operation, monitoring and integration into inventory control system.
- Field gateway for tank sensor operation
- Intrinsically safe power supply and communication
E+H NXA820 Tankvision Tank Scanner
Dedicated tank inventory system which is operated by a standard web browser.
- Scans parameters from tank gauges
- Approved for custody transfer applications
E+H Omnigrad M TC10 TC Thermometer
Modular design with standard terminal heads as per DIN EN 50446, measuring range -40 to 2012°F.
- Universal range of application
- Measuring range: -40 to 2012°F (-40 to 1100°C)