E+H iTHERM TT412 Hygienic Thermowell
Designed for hygienic and aseptic applications in the food & beverages and life sciences industries.
- iTHERM QuickNeck – tool-free recalibration of the insert
- Pressure range up to 40 bar (580 psi)
E+H Levelflex FMP50 Guided Wave Radar Level Transmitter
Continuous level measurement of liquids, pastes and slurries in all basic level applications.
- Guided radar measurement principle
- -4 to 176°F (-20 to 80°C) process temperature range
E+H Levelflex FMP51 Guided Wave Radar Level Transmitter
Level measurement even under extreme process conditions such as high temperature and high pressure.
- Guided radar measurement principle
- Threaded or flange process connections
E+H Levelflex FMP52 Guided Wave Radar Level Transmitter
PFA-coated probe for use in aggressive liquids.
- Rod or rope probe
- -58 to 392°F (-50 to 200°C) process temperature
- -14.5 to 580 psi (-1 to 40 bar) process pressure
E+H Levelflex FMP53 Guided Wave Radar Level Transmitter
Continuous level measurement for the highest hygiene requirements in the food and life sciences industries.
- -4 to 302°F (-20 to 150°C) process temperature
- -14.5 to 232 psi (-1 to 16 bar) process pressure
E+H Levelflex FMP54 Guided Wave Radar Level Transmitter
Continuous level measurement of high temperature and high pressure applications in the oil and gas, chemical and power industries.
- ±0.08in (±2mm) accuracy
- Bluetooth wireless technology
- Heartbeat technology
E+H Levelflex FMP55 Guided Wave Radar Level Transmitter
Multiparameter device designed for interface measurement in liquids.
- Rod, rope or coax probe
- -58 to 392°F (-50 to 200°C) process temperature
- -14.5 to 580 psi (-1 to 40 bar) process pressure
E+H Levelflex FMP56 Guided Wave Radar Level Transmitter
Cost-effective base model for all level applications in bulk solids.
- Rope probe
- -40 to 248°F (-40 to 120°C) process temperature
- -14.5 to 232 psi (-1 to 16 bar) process pressure
E+H Levelflex FMP57 Guided Wave Radar Level Transmitter
Designed for the highest demands of level measurement in bulk solids.
- Rod or rope probe
- -40 to 302°F (-40 to 150°C) process temperature
E+H Liquicap FMI21 Capacitive Level Transmitter
Two-rod capacitive level measurement probe for continuous measurement in liquids.
- 2.5m (8ft) probe length
- Vacuum to 10bar (145psi) process pressure
E+H Liquicap FMI51 Capacitive Level Transmitter
Fully insulated rod probe, for standard and extreme process conditions such as pressure, temperature, and build-up.
- Vacuum to 100bar (1450psi) process pressure
- -80° to 200°C (-112° to 392°F) process temperature
E+H Liquicap FMI52 Capacitive Level Transmitter
Designed for continuous level and interface measurement in liquids in large measuring ranges.
- Vacuum to 100bar (1450psi) process pressure
- 0.42 to 10m (1.38 to 33ft) measuring range
E+H Liquicap FTI51 Level Switch
Designed for for liquids that are highly viscous and tend to form build-up.
- Capacitive liquid measuring principle
- Interface and foam detection
E+H Liquicap FTI52 Level Switch
Designed for liquids that are highly viscous and tend to form build-up, for large measuring ranges.
- -112 to 392°F (-80 to 200°C) process temperature
- Vacuum 1450 psi(Vacuum 100 bar) max. overpressure limit
E+H Liquifloat FTS20 Float Switch
Point level switch used for overflow prevention or pump protection in tanks and vessels with appropriate fluids.
- -20 to 85°C (-4 to 185°F) operating temperature
- 3bar (43.5psi) operating pressure
E+H Liquiline CM14 Transmitter
One-channel, 4-wire controller based on digital Memosens technology for the food, power, water and wastewater industries.
- 2 x 0/4 to 20 mA active output
- Maximum 500 Ω load
E+H Liquiline CM442 Transmitter
Transmitter for pH, ORP, conductivity, oxygen, chlorine, turbidity, sludge level, SAC, nitrate and many other parameters.
- One controller for all parameters and applications
- Seamless system integration
E+H Liquiline CM442R Transmitter
Compact multiparameter DIN-rail and cabinet device for all industries.
- Modular 4 wire controller
- 1/2 digital channels for Memosens protocol
E+H Liquiline CM444 Transmitter
Transmitter for pH, ORP, conductivity, oxygen, chlorine, turbidity, sludge level, SAC, nitrate and many other parameters.
- Up to 8 channels
- Seamless system integration
E+H Liquiline CM444R Transmitter
Expandable multiparameter DIN-rail and cabinet device for all industries.
- 4 channels in one device
- Expandable at any time
- High-speed installation