E+H Field Xpert SMT70 Field Communicator
HART, PROFIBUS DP/PA, FOUNDATION Fieldbus, Modbus, and Endress+Hauser service protocols (CDI, ISS, IPC and PCP) .
- NAMUR NE 107 instrument diagnosis
- Hazardous & non-hazardous areas
E+H Field Xpert SMT77 Field Communicator
Universal, high-performance tablet PC for device configuration in Ex Zone 1 areas.
- Large, 10.1-inch display
- Up to 5-hour battery runtime
E+H Fieldgate FXA42 Gateway
For data transmission via Ethernet, WLAN or mobile telecommunications.
- Four 4 to 20mA inputs, 4 digital input and output channels
- Modbus TCP and Modbus RTU
E+H Flexdip CYA112 Immersion Assembly
Modular assembly for sensor immersion in open basins, channels, or tanks.
- Up to 6 bar (87 psi) process pressures
- Twist-free installation of fixed-cable sensors
- Fast installation and exchange of Memosens sensors
E+H Flexdip CYH112 Holder System
Modular system for sensors and assemblies in open basins, channels, or tanks.
- imple, cost-effective and flexible
- Existing structural works can be used
E+H Flowfit CPA240 Flow Assembly
Designed for demanding applications where high temperatures and pressures are involved.
- 3 electrode installation locations
- 120mm electrodes
E+H Flowfit CPA250 Flow Assembly
Designed for pipe installation in water and wastewater treatment.
- 3 electrodes installation locations
- 120 mm electrodes
E+H Flowfit CUA250 Turbidity Assembly
Flow assembly for water and wastewater applications.
- 122°F (50°C) max process temperature
- 6bar (87psi) max process pressure
- Flow through holder for the turbidity sensors CUS31/41
E+H Flowfit CUA252 Turbidity Assembly
Polyethylene (PE) flow assembly for drinking water, process water and utilities.
- 32 to 140°F (0 to 60°C) process temperature
- 0 to 6 bars process pressure
E+H Flowfit CYA21 Flow Assembly
Universal assembly for analytical measuring points in power plants and industrial utilities.
- 5 to 212°F (-15 to 100°C) process temperature
- 232 psi (16 bar) maximum process pressure
- For sensors with Pg 13.5 or NPT 1/2″ process connection
E+H Flowfit CYA251 Flow Assembly
Flow assembly for nitrate/SAC, turbidity and oxygen sensors with a diameter of 40mm.
- Process connections for almost all pipe diameters available
- Suitable for pipe or wall installation
E+H Flowfit CYA27 Flow Assembly
Assembly for chlorine measurement in drinking, industrial, and pool water.
- 0 to 60 °C (32 to 140 °F) non-freezing process temperature
- 0 to 4 bar (0 to 58 psi) relative process pressure range
E+H FTL62 Liquiphant Level Switch
Point level switch for all liquids with highly corrosion-resistant coating.
- -60 to 150°C (-58 to 302°F) process temperature
- -1 to 40bar process pressure
- Up to 3m (9.8 ft) sensor length
E+H Indumax CLS50D Conductivity Sensor
Memosens toroidal conductivity sensor for chemical applications.
- 2µS/cm to 2000 mS/cm measuring range
- High durability and chemical resistance
E+H Indumax CLS52 Analog Conductivity Sensor
Inductive conductivity sensor for applications with fast temperature changes.
- Measurement range: 0.1 to 2000mS/cm
- Process temperature: Max. 257°F/125°C (short time up to 284°F/140°C)
E+H Indumax CLS54D Conductivity Sensor
Memosens toroidal conductivity sensor for hygienic and sterile applications.
- Measuring range: 100 µS/cm to 2000 mS/cm
- Cell constant k: 6.3 1/cm
E+H iTEMP TMT122 Temperature Transmitter
Transformation of sensor signals into stable and standardized output signals for all industries.
- Universal settings with HART® protocol
- High accuracy in total ambient temperature range
E+H iTEMP TMT127 Temperature Transmitter
E+H iTEMP TMT127 Temperature Transmitter
- Fixed measuring range for Pt100
- Two-wire technology
E+H iTEMP TMT128 Temperature Transmitter
Fixed range temperature transmitter for converting TC input signals into a 4 to 20 mA analog output signal.
- Fixed range temperature transmitter
- Input: Thermocouple (TC)