Showing 141–160 of 406 results

Show sidebar
E+H Liquiphant FTL81 Level Switch

E+H Liquiphant FTL81 Level Switch

For liquids for FailSafe overfill prevention.

  • For liquids up to SIL3
  • Thread and flange process connection
  • -76 to 540°F (-60 to 280°C) temperature
Quick view
E+H Liquiphant FTL85 Level Switch

E+H Liquiphant FTL85 Level Switch

For use in hazardous areas with all international certificates.

  • For liquids up to SIL3
  • Thread and flange process connection
  • -76 to 300°F (-50 to 150°C) temperature
Quick view
E+H Liquipoint FTW23 Level Switch

E+H Liquipoint FTW23 Level Switch

Developed and built for the food industry and meets all international hygiene requirements.

  • CIP and SIP cleanability ensured
  • LED display
Quick view
E+H Liquipoint T FTW31 Level Switch

E+H Liquipoint T FTW31 Level Switch

Rod probe for multipoint detection for up to 5 switch points.

  • Detection of up to five point levels
  • No calibration required
Quick view
E+H Liquipoint T FTW32 Level Switch

E+H Liquipoint T FTW32 Level Switch

Rope probe designed for multipoint detection for up to 5 switch points.

  • Up to 5 rods or ropes
  • Threaded process connection
  • 0.25 to 15m (10 to 590") sensor length
Quick view
E+H Liquiport CSP44 Water Sampler

E+H Liquiport CSP44 Water Sampler

Portable, fully automatic sampling in water, wastewater and industrial applications.

  • -20 to 160°F (-30 to 70°C) measuring range
  • ±0.5K accuracy
Quick view
E+H Liquisys CLM223 Conductivity Transmitter

E+H Liquisys CLM223 Conductivity Transmitter

A standard compact panel device for all analog conductivity sensors.

  • 1-channel transmitter input
  • 4-wire transmitter with a two-line display
Quick view
E+H Memograph M RSG45 Advanced Data Manager

E+H Memograph M RSG45 Advanced Data Manager

Saves, visualizes, analyzes and communicates, multichannel data recording system.

  • High degree of data security
  • HART input card
Quick view
E+H Memosens CCS120D Chlorine Sensor

E+H Memosens CCS120D Chlorine Sensor

Memosens disinfection sensor for wastewater and process water.

  • 0.1 to 10 mg/l total chlorine measuring range
  • Amperometric measurement of total chlorine
Quick view
E+H Memosens CCS50D Chlorine Dioxide Sensor

E+H Memosens CCS50D Chlorine Dioxide Sensor

Memosens sensor for water, process water and utilities in all industries.

  • Measuring range:
    • Trace: 0 to 5 mg/l ClO2
    • Standard: 0 to 20 mg/l ClO2
    • High: 0 to 200 mg/l ClO2
Quick view
E+H Memosens CCS51D Chlorine Sensor

E+H Memosens CCS51D Chlorine Sensor

Memosens sensor for drinking water, pool and process water as well as utilities in all industries.

  • Amperometric measurement of dissolved free chlorine
  • Closed amperometric 2-electrode measuring cell
Quick view
E+H Memosens CLS15E Conductivity Sensor

E+H Memosens CLS15E Conductivity Sensor

Digital 2-electrode conductivity sensor with Memosens 2.0 technology, for low conductivity measurements in pure and ultrapure water.

  • Measurement range:
    • k=0.01: 0.04 to 20µS/cm
    • k=0.1: 0.10 to 200µS/cm
Quick view
E+H Memosens CLS82D Conductivity Sensor

E+H Memosens CLS82D Conductivity Sensor

4 electrode conductive conductivity sensor, 1µS/cm to 500 000 µS/cm range, hygienic design.

  • Hygienic design certified by EHEDG and 3-A
  • Sterilizable and autoclavable
Quick view
E+H Memosens CLS82E Conductivity Sensor

E+H Memosens CLS82E Conductivity Sensor

For hygienic applications in life sciences, food and beverage.

  • Process pressure
    • 17bar abs at 20°C (247psi at 68°F)
    • 9bar abs at 120°C (131psi at 248°F)
Quick view
E+H Memosens COS22E Digital Oxygen Sensor

E+H Memosens COS22E Digital Oxygen Sensor

Hygienic, amperometric oxygen measurement for food and life sciences applications.

  • Measurement range
    • Standard sensor: 0 to 60mg/l, 0 to 600%SAT, 0 to 1200hPa, 0 to 100Vol%
    • Trace sensor: 0 to 10mg/l, 0 to 120%SAT, 0 to 250hPa, 0 to 25Vol%
Quick view
E+H Memosens COS81D Oxygen Sensor

E+H Memosens COS81D Oxygen Sensor

Memosens optical oxygen sensor for hygienic applications in life sciences, pharma and food.

  • Memosens optical oxygen sensor
  • Hygienic design according to EHEDG and ASME BPE
Quick view
E+H Memosens COS81E Digital Optical Oxygen Sensor

E+H Memosens COS81E Digital Optical Oxygen Sensor

Hygienic sensor for oxygen measurement over multiple sterilization cycles.

  • Measurement range
    • 0.004 to 30mg/l
    • 0.05 to 330%SAT
    • 0.1 to 700hPa
Quick view
E+H Memosens CPL51E Digital pH Sensor

E+H Memosens CPL51E Digital pH Sensor

Laboratory sensor for use in drinking water, wastewater, and process water applications.

  • pH 0 to 14 measurement range
  • -5° to 80°C (23° to 176°F) process temperature
Quick view
E+H Memosens CPS11D Orbisint pH Sensor

E+H Memosens CPS11D Orbisint pH Sensor

Memosens digital technology, suitable for harsh applications, up to 232 psi (16 bar).

  • 0 to 14 pH measuring range
  • Pressure-stable up to 232 psi (16 bar)
Quick view
E+H Memosens CPS11E Orbisint pH Sensor

E+H Memosens CPS11E Orbisint pH Sensor

Digital Memosens 2.0 electrode for use in process, water, and wastewater industries.

  • Sterilizable
  • IP68 protection
  • ATEX, IECEx, and CSA C/US approvals
Quick view