E+H Prosonic FMU40 Ultrasonic Sensor
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 5m.
- Reliable non-contact measurement
- Hermetically sealed and potted sensor
E+H Prosonic FMU41 Ultrasonic Sensor
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 8m.
- Threaded process connection
- -40 to 176°F (-40 to 80°C) temp range
E+H Prosonic FMU42 Ultrasonic Sensor
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 10m.
- Flange process connection
- -40 to 176°F (-40 to 80°C) temp range
E+H Prosonic FMU44 Ultrasonic Sensor
Designed for sophisticated level measurement in liquids and bulk solids for up to 20m.
- Flange process connection
- -40 to 176°F(-40 to 80°C) temp range
E+H Prosonic S FMU90 Ultrasonic Level Transmitter
Level measurement of fluids and bulk materials with one or two sensors for measuring of up to 148 ft (45 m) and level limit detection.
- ±0.2% of maximum span of sensor accuracy
- 0.04in (1mm) resolution
E+H Prosonic S FMU95 Ultrasonic Level Transmitter
E+H T14 PT100 Thermometer Level measurement of fluids and bulk materials with up to 10 sensors with Profibus DP output.
- ±0.2% of maximum span of sensor accuracy
- 0.04in (1mm) resolution
E+H Prothermo NMT539 Temperature Sensor
Intelligent HART signal converter, with a combined average temperature sensor and water bottom interface probe.
- Resistance temperature detector measuring principle
- Process connection: Flanges
E+H RA33 Batch Controller
Designed to record flow and control output signals for valves and pumps to ensure the exact dosing of predefined batch quantities.
- 3 operation buttons and 14 function buttons
- Data storage
E+H RIA14 Loop-Powered Field Indicator
Indication of a 4 to 20 mA signal on-site, bargraph in increments of 10%.
- Single compartment housing
- 5-digit LC display
- Illuminated display, rotatable in 90° steps
E+H RIA15 Process Indicator
Loop-powered 4 to 20 mA process indicator with optional HART® communication.
- ATEX, IECEx, FM, CSA
- SIL interference freeness according to EN 61508
- Marine approval
E+H RIA16 Loop-Powered Indicator
Loop-powered field indicator for looping into the 4 to 20 mA current circuit.
- Display of 4 to 20 mA measured values
- 5-digit measured value display
E+H RIA45 Process Meter
Multifunctional panel mounted process meter for monitoring and indication of analog measured values.
- 5-digit 7-segment LC display, backlit
- 1 or 2 universal inputs
E+H RIA452 Process Indicator
Displays analog measured values with pump control and batch functions.
- 7-digit 14-segment LC display, large bar graph
- Digital status inputs for pump monitoring
- Flow measurement for open channels and weirs
E+H RIA46 Field Meter
Multifunctional field meter for monitoring and indication of analog measured values.
- 5-digit 7-segment LC display, backlit
- 1 or 2 universal inputs
- 2 relays (optional)
E+H RLN42 NAMUR Isolating Amplifier
Two-channel NAMUR isolating amplifier for the transmission of binary switch signals.
- Power supply: 20 to 250 V AC/DC
- Loop power supply: 8 V DC
E+H RMA42 Process Transmitter
Universal transmitter, loop power supply, barrier and limit switch, 1 or 2 universal inputs.
- 1 or 2 calculated values and linearization table
- Min./max. value saved
E+H RN22 Active Barrier
Intrinsically safe 24 VDC compact interface module for use in hazardous areas, SIL systems.
- Loop power supply: 17.5 V ±1 V bei 20mA open circuit voltage: 24.5 V ±5%
- Input signal range (underrange/overrange): 0 to 22mA feeding/not feeding
E+H Silopilot FMM20 Level Meter
Electromechanical level system for light bulk solids in silos and bunkers.
- Measurement of levels up to 32m (105ft)
- -20° to 150°C (-4° to 302°F) process temperature range
E+H Silopilot FMM50 Level Meter
Electromechanical level system for all bulk solids and liquids.
- Level measurements up to 90m
- Process temperatures up to 230°C (446°F)
E+H Smartec CLD132 Compact Conductivity Device
Toroidal conductivity measuring system for inductive conductivity in the food & beverage industry.
- 100 µS/cm – 2000 mS/cm measurement range
- Max 284°F (140°C) (max 30min) process temperature